Products
Feedstock lines & specifications.
Five product lines, each with an indicative parameter table. Binding values, tolerances and test methods are agreed per contract before loading.
Used Cooking Oil
- Origin
- Collected from catering, food service and food-industry operations, filtered and consolidated at collection facilities.
- Typical application
- Suitable as feedstock for HVO and FAME biofuel production, subject to specification agreed per contract.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| Free Fatty Acids (FFA, as oleic) | ≤ 5% (higher-FFA grades up to ~15% exist) | AOCS / titration |
| Moisture, Impurities & Unsaponifiables (MIU) | ≤ 2% | per contract |
| Sulphur | ≤ 40–50 ppm | per contract |
| Iodine Value | ≥ 50–90 g I₂/100g (origin-dependent) | per contract |
| Wax content | ≤ 300 ppm | per contract |
Indicative values reflect typical market trading ranges. Binding specifications and the applicable analysis methods are agreed per contract and confirmed by Certificate of Analysis (CoA) for each lot.
UCO is a waste stream; parameters vary with origin, feedstock mix and collection. Ranges above reflect commonly traded "standard quality"; off-spec parcels are traded separately by agreement.
Fatty Waste Oil / fatty acid streams
- Origin
- By-products and side streams from vegetable oil refining and food processing.
- Typical application
- Feedstock for biofuel production and inputs to oleochemical processing.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| Free Fatty Acids (FFA) | Highly variable — commonly 30% to 90% depending on stream (e.g. acid oil / soapstock derivatives) | per contract |
| Moisture & Impurities | per contract | per contract |
| Sulphur | per contract | per contract |
Fatty waste oils are not a standardised product. There is no single market specification; all parameters are defined and confirmed per parcel by CoA before contracting.
Sunflower Oil
- Origin
- Crude and refined, sourced from EU and Black Sea region crushers.
- Typical application
- Technical and industrial applications, including feed-adjacent uses agreed per specification. No food-grade claims made on this website.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| FFA (as oleic) | ~0.5–2% | per contract |
| Moisture & volatile matter | ≤ ~0.2% | per contract |
| Phosphorus | ~200–1,200 ppm (crude, pre-degumming) | per contract |
| Colour | per contract | per contract |
Indicative values reflect typical market trading ranges. Binding specifications and the applicable analysis methods are agreed per contract and confirmed by Certificate of Analysis (CoA) for each lot.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| FFA (as oleic) | ≤ ~1% | per contract |
| Moisture & volatile matter | ≤ ~0.1% | per contract |
| Phosphorus | ≤ ~30 ppm (water-degummed); lower for acid/super-degummed | per contract |
| Colour | per contract | per contract |
Indicative values reflect typical market trading ranges. Binding specifications and the applicable analysis methods are agreed per contract and confirmed by Certificate of Analysis (CoA) for each lot.
Refined and bleached grades are available on request against a specific contract quality.
Rapeseed Oil
- Origin
- Crude and refined, sourced from EU crushers.
- Typical application
- Biofuel feedstock (FAME/HVO), technical and industrial applications.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| FFA (as oleic) | ~0.5–2% | per contract |
| Moisture & volatile matter | ≤ ~0.2% | per contract |
| Phosphorus | ~200–1,200 ppm (crude, pre-degumming) | per contract |
| Colour | per contract | per contract |
Indicative values reflect typical market trading ranges. Binding specifications and the applicable analysis methods are agreed per contract and confirmed by Certificate of Analysis (CoA) for each lot.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| FFA (as oleic) | ≤ ~1% | per contract |
| Moisture & volatile matter | ≤ ~0.1% | per contract |
| Phosphorus | ≤ ~30 ppm (water-degummed); lower for acid/super-degummed | per contract |
| Colour | per contract | per contract |
Indicative values reflect typical market trading ranges. Binding specifications and the applicable analysis methods are agreed per contract and confirmed by Certificate of Analysis (CoA) for each lot.
Refined and bleached grades are available on request against a specific contract quality.
Soybean Oil
- Origin
- Crude and refined, sourced from EU and international crushers.
- Typical application
- Technical and industrial applications, oleochemical inputs and other uses agreed per specification.
Indicative trading parameters — not a binding specification.
| Parameter | Indicative range | Method |
|---|---|---|
| FFA (as oleic) | ≤ ~1% | AOCS |
| Moisture & volatile matter | ≤ ~0.1% (shipment tolerances may apply) | AOCS |
| Phosphorus | ≤ ~0.02% (~200 ppm) after degumming | AOCS |
| Flash point | ≥ ~121 °C (250 °F) | AOCS |
| Colour | per contract | AOCS |
Soybean oil grades follow established trade rules (e.g. FOSFA / NOPA conventions). Exact grade, tolerances and discounts are set in the contract.